|
[ VSR-M type 1 - 8B ]
The shaft seal is a mechanical seal. This is a standard gear pump for
transporting large capacities, directly driven by a 4P motor with a
built-in safety valve.
It is widely used for various oils, and a ball or roller bearing is used for the shaft bearing.
It can handle pumped liquids with a viscosity of up to 250 mPa・s.
Up to 0.5 MPa (ball bearing)
Up to 0.8 MPa (roller bearing) |
[ VSR type 1 - 8B ]
The shaft seal is a gland packing type.
Up to 0.5 MPa (ball bearing)
Up to 0.8 MPa (roller bearing) |
[ VSR-BSM type 1 - 8B ]
The shaft seal is a mechanical seal. It is a Gear Pump for transporting
large amount of low viscosity oil such as kerosene or diesel oil.
Up to 0.3MPa |
|
|
VSR-M type coupling direct drive |
VSR-M type pump main body |
[1] [2] |
[1] [2] |
■ Structural drawing (VSR type) |
■ Specifications (VSR type) |
■ Outline drawing (VSR type) |
|