|
[ KSR-M type 1 - 10B ]
The shaft seal is a mechanical seal. This is a standard gear pump for
transporting large capacities, directly driven by a 6P motor with a
built-in safety valve.
It is widely used for various oils, and a ball or roller bearing is used for the shaft bearing.
It can handle pumped liquids with a viscosity of up to 1000 mPa･s.
Up to 0.7 MPa (ball bearing)
Up to 1.0 MPa (roller bearing) |
 |
 |
| KSR-M type coupling direct drive |
KSR-M type pump main body |
| [1］ [2］ |
[1］ [2］ |
[ KSR type 1 - 10B ]
The shaft seal is a gland packing type.
Up to 0.7 MPa (ball bearing)
Up to 1.0 MPa (roller bearing) |
[ KSR-BSM type 1 - 10B ]
The shaft seal is a mechanical seal. It is a Gear Pump for transporting
large amount of low viscosity oil such as kerosene or diesel oil.
Up to 0.3MPa |
■ Structural drawing (KSR type)  |
| ■ Specifications (KSR type) |
| ■ Outline drawing (KSR type) |
|
![[ KSR type ]](../../img/seihin/ksr-e.jpg){kind=small}
